Wait about 4 seconds, until the front panel LEDs flicker then turn off. To Reboot the Unit using the front panel reset button: If a port profile has already been selected, it is shown at the top of the screen. AnywhereUSB drivers work equally well on physical servers or virtual machines in virtualized environments. The ‘Disconnect’ button should only be used for troubleshooting purposes, i.

Uploader: Mikamuro
Date Added: 13 November 2011
File Size: 33.30 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 19876
Price: Free* [*Free Regsitration Required]

The host computer then attempts to connect to the AnywhereUSB. After the connection process completes, the AnywhereUSB Configuration Utility will update its Connection Status information and look similar to the following: Access to Encrypted RealPort services can be enabled or disabled.

In case of redundant dual powering, both supplies provide power to the device about evenly proportioned. It is usually best to use the 2g TCP port numbers for these services because they are well known by most applications. Click on that port’s link under the Port heading. After changing the user name or password, you will immediately be asked to log back in to the web interface using the new values. Disclaimers Information in this document is subject to change without notice and does not represent a commitment on the part of Digi International.


For a Class B network example of The utility displays a list of all AnywhereUSB devices on your local subnet and on any subnet configured in the Discovery List.

In a client-initiated connection, the AnywhereUSB attempts to reach the Connectware Manager server to establish the connection.

Digi E AnywhereUSB/2 G2 [] $ –

The key is located in this location: The fields are called idVendor and idProduct. Since the connection request is driven by the host PC, the session will automatically get re-established.

Contact a Digi expert and get started today!

This permits the Gg2 Manager to connect back to the device server, or to dynamically update a DNS with the IP address of the device. A screen similar to the following is displayed. The profile can be changed, or retained but individual settings adjusted. Click the port to be configured.

AnywhereUSB/2 Product Detail – Digi International

The ‘Disconnect’ button should only be used for troubleshooting purposes, i. Enables or disables the idle timeout for the connection. By default there is no password authentication. Enter v2 boot to see all command options. This kind of reset clears all configuration settings.

Click Apply to save the settings. The default is public. Enabling wireless robotics aboard the space station. If no response is received, then the secondary server is tried.


Digi 50001689-01 B Anywhere USB/2 G2 AW-USB-2 Remote NO CABLE Alt () Other //

The AnywhereUSB automatically determines the type of image being uploaded. Canceling Changes To cancel changes to configuration settings, click the Refresh or Reload button on the Web browser.

These serial settings may be documented as 8N1, which means that the device is using a baud rate of bits per second, 8 data bits, no parity, and 1 stop bit. Using the Boot Command Refer to Chapter 10 for more information. In addition, any files loaded into the device through the File Management page are also removed.

Indeed, up to seven hubs can be connected parallel at any given level.

Using the front panel Reset aanywhereusb/2 If the AnywhereUSB cannot be accessed from the web interface, the configuration can be restored to factory defaults using the Reset button. Restoring the AnywhereUSB to Factory Defaults The device configuration can be reset to factory defaults as needed during the configuration process.

On the Reboot page, click the Reboot button.